Hardware
[b]Recomendado como Digirepeater /Igate[/b]
LILYGO® Paxcounter LoRa V2.1_1.6.1 ESP32 433/868/915MHZ
[img]https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQMUiPhkapk9-BceTFFzW1n29iQ__2NOR01_5U1HZNupia9Rzx9HsdwV-ry2B7H03r-Obg&usqp=CAU[/img]
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQMUiPhkapk9-BceTFFzW1n29iQ__2NOR01_5U1HZNupia9Rzx9HsdwV-ry2B7H03r-Obg&usqp=CAU
[b]Recomendado como Tracker[/b]
[b]LILYGO®TTGO Meshtastic t-beam V1.1 ESP32 LoRa 915MHz 433MHz 868MHz 923MHz[/b]
[img]https://user-images.githubusercontent.com/115531510/195151725-d961c8c1-73b4-4243-8cfb-c09d0db80e02.jpg[/img]
Software a Cargar https://github.com/lora-aprs/LoRa_APRS_iGate
https://github.com/lora-aprs/LoRa_APRS_iGate/archive/refs/heads/master.zip
Compiling and configuration
How to compile
The best success is to use PlatformIO (and it is the only platform where I can support you).
Go to PlatformIO download and install the IDE.
If installed open the IDE, go to the left side and click on ‘extensions’ then search for ‘PlatformIO’ and install.
When installed click ‘the ant head’ on the left and choose import the project on the right.
Just open the folder and you can compile the Firmware.
Configuration
You can find all necessary settings to change for your configuration in data/is-cfg.json.
To upload it to your board you have to do this via Upload File System image in PlatformIO!
To find the ‘Upload File System image’ click the PlatformIO symbol (the little alien) on the left side, choose your configuration, click on ‘Platform’ and search for ‘Upload File System image’.
Solución al error “Error: Please install Git client from https://git-scm.com/downloads”
> Cargar img desde PlatformIO la imagen, desde [b]”upload filesistem imagen”[/b]
—
CALLSIGN – SSID:
El indicativo de nuestra estación que enviamos a la red de APRS con nuestra baliza, lo podemos continuar con un guión, seguido de un numero del 1 al 15. Estos números es el SSID. Sirve para poder identificar diferentes tipos de funcionamiento en la red de APRS, como:
-0 Su estación primaria generalmente está fija y tiene capacidad de mensajes
-1 estación adicional genérica, digi, móvil, wx, etc.
-2 estación adicional genérica, digi, móvil, wx, etc.
-3 estación adicional genérica, digi, móvil, wx, etc.
-4 estación adicional genérica, digi, móvil, wx, etc.
-5 Otras redes (Dstar, Iphones, Androids, Blackberry, etc.)
-6 actividad especial, operaciones de satélite, camping o 6 metros, etc.
-7 walkie talkies, HT u otro portátil humano
-8 barcos, veleros, vehículos recreativos o segundo móvil principal
-9 Móvil primario (por lo general, con capacidad para mensajes)
-10 internet, Igates, echolink, winlink, AVRS, APRN, etc.
-11 globos, aviones, naves espaciales, etc.
-12 APRStt, DTMF, RFID, dispositivos, trackers de una vía , etc.
-13 estaciones meteorológicas
-14 camioneros o, en general, conductores a tiempo completo
-15 estación genérica adicional, digi, móvil, wx, etc.
Fuente SSID: https://www.c4fmpanama.org/APRS/
Saludos
Lima
Otra muy buena opción es:
https://github.com/richonguzman
Tracker
https://github.com/richonguzman/LoRa_APRS_Tracker
iGate
https://github.com/richonguzman/LoRa_APRS_iGate
Saludos
Lima